... h2. Air Observer Downloader This is used to download the data from Air Observer Mini and Micro loggers to CIMA IGC format. Installing Air Observer Downloader software is a bit tricky because the installer is pants and does not work properly, but if you follow these instructions carefully you should be able to get it to work. * [Download the software|^Air Observer full install.zip]. * Unzip the file somewhere on your computer. * In the Install folder, double click on *SETUP.EXE* to run the installer. * Once the installer has finished, go back to the original zip file you downloaded and find the file *after install/AO_MLR.exe*. This must be copied *over* the one the installer put in the install location (eg _C:\Program Files\TiltTech\AO_MLR Downloader\AO_MLR.exe_) * Copy the two files *loggers.tsv* and *tasks.tsv* to the location where you plan to eventually save your output .igc files. * Now you can run the downloader\! The installer should have put a shortcut in your start menu. * Set the location where the eventual output files will be saved. * Plug in the Air Observer, it does not need to be switched on. * If windows asks for a USB driver you must now install it... A wizard will open, manually select the *3-USB Driver* folder in the zip file you downloaded. The wizard should find the correct files and install them onto your computer. * The Air Observer should now download automatically. * Note that it is MUCH easier and faster to download Air Observers when the ID of each one has been saved and a task window has been set. * See Annex 2 of the [appropriate CIMA approval document|http://www.fai.org/microlight/flight_recorders] for full downloader instructions. Note this install is known to work on Windows XP and possibly Vista. It is not known if it works with Windows 7. h2. Documents {attachments}
|